2025-04-10 04:10:54 +02:00

5.0 KiB

Raw Blame History

title, description, published, date, tags, editor, dateCreated

title	description	published	date	tags	editor	dateCreated
09 Special Hardware		true	2023-05-03T05:35:30.253Z		markdown	2023-05-03T03:44:22.001Z

Programmable Mouse

If you have a mouse with profiles or adjustable DPI, there is a chance it is supported by Piper, If you are in doubt you can simply try it and remove Piper if it doesn't work

install it with the following command

sudo pacman -S piper

Now open the program and check if it detects your mouse

BlackMagic Capture Cards

WIP!

Xbox One Controller

Xpad

xpad works great, is the default on modern Linux distros and supports a wide range of controllers

For Bluetooth to work with xpad and the Xbox One controllers you need to disable ertm (This is not needed for xpadneo)

create the config file

sudo vim /etc/modprobe.d/xbox_bt.conf

Add the following line to the document and save and exit with CTRL + X.

options bluetooth disable_ertm=1

Xpadneo

xpadneo is a better driver for xbox one controllers if you use bluetooth, It enables vibration and even the vibration inside the triggers, It supports battery level indication, It also fixes the mapping in many many games that where previously unplayable with a Xbox One controller on Linux.

Install the dependencies

sudo pacman -S dkms bluez bluez-utils

Install xpadneo from the AUR

git clone https://aur.archlinux.org/xpadneo-dkms-git.git && cd xpadneo-dkms-git && makepkg -si

Now you should be able to reboot and it should be all good, Having the controllers vibrate for a second when connected is a good indicator that it works.

Xow

Xow is a better driver for xbox one controllers if you use the official wireless controller dongle from Microsoft, I don't own one so I can't test anything I would write here, So I just don't, I do mention it in case you have one.

Racing Wheels

Racing wheels should work out of the box on Linux, Including Force Feedback, Shifters, pedals and most things you can throw at it. But if you like to fine tune some things you may need some software. This is mostly not even the case, I played a long time just using the default kernel drivers, But some of these tools might come in very handy if you play different games, with different settings or with unsupported wheels.

Oversteer

Oversteer will enable a few cool things like Turning Degree and Lock if the game you want to play doesn't support it. It also enables you to set profiles for games and gives you compatibility modes so that you can play older games that expect a G27 for example.

Install it with the following command

git clone https://aur.archlinux.org/oversteer.git && cd oversteer && makepkg -si

You can open the program now and check some things out.

lg4ff

lg4ff is a kernel module for steering wheels which enables you to adjust the lights on a G29 for example, It also allows you to fine tune and even amplify the Force Feedback, Aplify it on your own risk tho, I already wrecked a G29, The inner housing broke, don't worry about it overheating or anything.

Install it with the following command

git clone https://aur.archlinux.org/new-lg4ff-dkms-git.git && cd new-lg4ff-dkms-git && makepkg -si

Handbrake

Handbrakes are not that common sadly, You can purchase an expensive one from Fanatec, buy one from Aliexpress or create your own.

If you use a Fanatec Handbrake You just need to add a few lines with the correct ProductID and VendorID to the inputdevices.json file of the game. For Feral games it will be located in the installation folder under the /Share directory. Just add the folllowing lines with the correct ProductID and VendorID before the last ] of the file. These Product and Vendor IDs are for a Arduino Leonardo. You can find the right Product and Vendor IDs by typing lsusb -v in a terminal when the device is connected.

{
"Name": "Handbrake",
"VendorID": "0x2341",
"ProductIDs": [
"0x8036"
],
"Category": "Wheel",
"Type": "UnknownWheel"
}

If you made your own or bought a complete handbrake sim set from Aliexpress or Ebay and it is not working properly follow the following instructions.

Download this little zip file, It includes inputdevice.json files for Dirt Rally and Dirt 4, It also includes the Arduino Sketch, The Joystick Library and a little readme file.

https://houtworm.cloud/s/ksrijLyYseQPFKx

We will need arduino installed on our system

sudo pacman -S arduino

Copy the Joystick folder in the Joystick master zip file to the Arduino libraries folder which is located in ~/Arduino/libraries

Open Arduino and replace all text with this content

#include <Joystick.h>

const int potPin = A0;
Joystick_ Joystick;

void setup() {
  Joystick.begin();
}

void loop() {
  int rawValue = analogRead(potPin);
  int value = 255 - map(rawValue, 750, 1023, 0, 255);
  Joystick.setXAxis(value);
}

Make sure you put the right Arduino model and the right USB port in tools, Then click on Verify and if it succeeds press Upload to flash it to the Arduino.

If needed you can adjust the values (rawValue, 750, 1023, 0, 255). These may be different depending on how you built it

Now the Arduino is a functional Handbrake in Racing games :)

5.0 KiB Raw Blame History